Deep Clean Gel

• Best Suited Polished Stone with Calcium
• Heavy Alkaline Cleaner
• Neutralizes acidic powder residue
• Removes Grease, Grime, Soap Scum, Hard Water Spots and Food Stains

Product Description: A unique cleaning formulation designed to clean Grease, Grime, Soap Scum, Hard Water Spots and other soils and stains. Used for polished, honed, flamed and tumbled marble, granite, grout, limestone, travertine, natural stone and terrazzo surfaces. Will not harm polished stone. Non-acidic. Terrific for sanded and non-sanded grouts.

Coverage: Product will cover approximately 200 to 2,000 ft.� per gallon dependant on the severity of damage to the marble surface. For stone grout joints which has been heavily soiled, use at 2:1 ratio. Dilution rate may slightly reduce cleaning effectiveness. Light duty areas may be diluted up to 12:1.

Directions: Always test product in an inconspicuous area to test suitability for intended use. Apply Deep Clean Gel to designated area. For small areas, wipe, scrub and/or agitate product into surface using light duty, non-abrasive hand scrubber. For floors, apply product into designated areas. Use a tampico brush to agitate, simply scrub floor liberally. Now, let cleaner dwell, for best results, for approximately 2 to 10 minutes depending on severity. Dwell times allows synthetic surfactants to release, remove dirt to surface. Wipe or wet-vacuum clean form surface. Rinse if needed. For porous stone, remove product using wet-vacuum for best results. This completely removes soil from crevices.