Pro Sealer

  • V.O.C. Compliant
  • Great Water and Oil Repellent
  • Provides Long-Lasting Protection
  • Great Penetration for Polished Marble, Travertine, and Terrazzo Surfaces

Product Description: A unique solvent-based, V.O.C. compliant impregnator sealer which penetrates grout, stone and masonry surfaces to protect against water and oil staining while allowing substrate to properly breath. Non-yellowing and long lasting. Will not change surface appearance.

Coverage: Product will cover approximately 200 to 1,000 ft.� per gallon depending on the porosity of the stone. Two coats are recommended for optimum performance. Cure time: 24 hrs./repels water, 72 hrs./fully cured.

Directions: Always test product in an inconspicuous area to test suitability for intended use. Surface must be sound, thoroughly clean and free from waxes, sealants or coatings of any kind. For best results, use Stone Pro's Formula 51 stripper before applying Pro Sealer. Apply product evenly using a low-pressure sprayer or lamb's wool applicator. Do not dilute.

Caution: Combustible. Keep away from heat, open flame, sparks and/or any possible ignition source. Keep work area well ventilated. Gloves and goggles should be worn at all times. Respirator suggested in larger areas or non-ventilated areas. Read directions and other cautions on back of container before use of this product.

View MSDS Information

Copyright © 2018 Pro Line Carpet Maintenance Supply Inc. | * All prices subject to change without notice*